uxcell 604ZZ Deep Groove Ball Bearing Double Shield 604-2Z 80014, 4mm x 12mm x 4mm High Carbon Steel Z1 Bearings (Pack of 8)

Brand: uxcell

Features:

• Size: 604ZZ (Inner Dia.=4mm, Outer Dia.=12mm, Thickness=4mm)
• Shields on BOTH SIDES of the bearing to keep dust out. Suitable for high speed operation
• Made from High Carbon Steel, durability and resistance to under heavy loads
• ABEC Tolerance 1 (P0) for most general use
• Same As 604ZZ / 604-2Z / 80014. Pre-Lubricated, Easy to maintain

Details: NOTE：

Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

Description: Deep Groove Ball Bearings are one of the most widely used rolling bearings. Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on. With small friction and high-limit speed, Deep Groove Ball Bearings are cost-effective and require little maintenance. These cost-effective bearings are widely used in areas with low requirements for hardness. Single-row, pre-lubricated, normal accuracy.

Selection Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation SuffixRS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

Specification:
Model: 604ZZ
Shield Type: Double Shield
Material:High Carbon Steel
Heat Treatment:Quenching
Hardness: HRC50-55
Cage Material: Stamping Steel
Inner Diameter: 4mm
Outer Diameter: 12mm
Thickness (B): 4mm
Dynamic Load Rating (Cr): 0.97kN
Static Load Rating (Cor): 0.36kN
Accuracy Class: P0 (ABEC-1)
Noise Level: Z1
Number of Pack: 8 Pcs
Weight: 19g

Package Dimensions: 4.7 x 3.9 x 0.3 inches

Part Number: a18051900ux0197

model number: a18051900ux0197